 
半自動層壓機（觸摸屏數字化控制）
Semi-automatic laminator(touch screen digital control)
|
型號model |
層壓面積laminating area |
外形尺寸dimension |
設備重量weight |
|
JP-Y-1 |
2200×1800 |
2590×2250×1250 |
4 T |
|
JP-Y-2 |
2200×1100 |
2590×1550×1250 |
3 T |
|
JP-Y-3 |
2200×2200 |
2650×2590×1250 |
5 T |
|
需要的冷卻水路流量Cooling water flow needed 2L/min |
|
層壓高度Laminating height 25mm |
|
設備總功率Total power of equipment 33KW |
|
操作控制方式Operation controlling mode 手動/全自動manual/automatic |
|
加熱方式Heating mode 油加熱oil heating |
|
溫度方式Temperature control 智能溫度控制 intelligent temperature control |
|
工作區溫度均勻性Temperature uniformity in working area ≦±1.5℃ |
|
溫控精度Temperature control accuracy: ≦±1℃ |
|
溫控范圍Temperature control range 30℃—180℃ |
|
抽氣速率Pumping speed 30升/秒 |
|
層壓時間Laminating time 14min（包含固化時間including curing time） |
|
極限真空Operating vacuum degree 20-200Pa |
|
抽空時間 Exhausting time 4-6min |
1.智能化溫度控制系統,，使得溫度更加均勻,，更加易于對溫度的設定與控制。
2.層壓壓力可調，且可以根據工藝調壓,，使得組件的質量更加優良
3.可連續24小時高溫工作,。
4.先進的觸摸屏操作平臺，使得操作更加直觀,、易懂,。反應更加迅速，性能更加穩定.
5.采用完全人性化和智能化的系統操作流程,，整臺設備配備有多處檢測開關,，在正常的生產工作中，操作人員僅需將組件放在加熱平臺上,，按動合蓋開關即可,，此設備將自動輸入組件到主機進行層壓、固化,，自動將其輸出到指定位置等待操作員進行下一工序的處理.
1. Intelligent temperature control system makes the temperature more homogeneous and easier to set and control.
2. Laminating pressure is adjustable and can be adjusted according to the process, which makes the quality of modules better.
3. It could work continuously in high temperature for 24 hours
4.The advanced touch screen operating platform makes it more intuitive to operate, makes it respond more quickly, make the performance more stable and the failure rate is further reduced.
5. Applying a fully humanized operating procedure. The equipment is equipped with many detection switches. In the normal production, operators will only be required to put the modules on the heating platform and press the cover switch. The equipment will automatically laminate, cure and open cover automatically and wait for operator to start the next procedure. |
